Jan 15, 2012

Version 7.14
Now Released!

Order Upgrade (only) HERE.






June 01, 2011

Oct 01, 2010



June 01, 2010

  (Jan 15, 2012) 
[V7.14.00 now released]
BIG NEW FEATURES...YOU ASKED FOR IT...NOW WE'VE GOT IT!
** This is the ONLY software specifically for design, performance analysis and setup of tunnel hulls (TBDP

Version 7.13 (June 01, 2011) - many updates

Version 7.12   (Oct 01, 2010)  - general update

Version 7.11 (June 01, 2010) - many updates; VEE Hull Analysis NOW included

*** NEW (June 2010) - Now can select Inside Spray Rails or Outer Spray Rails or BOTH.  NOW input measured Static CG of boat hull if desired (otherwise TBDP© will calculate for you).
*** NEW (March 2010) - 'Rate-of-Change' performance analysis!
*** Vee hull and Vee-Pad hull Performance Analysis wizard - full performance analysis - one-button click that changes inputs to simulate a vee bottom hull.
*** Porpoise Analysis - NEW TBDP V7.10 BREAKTHROUGH FEATURE! - We have developed a new analysis tool! XPorpoise is an engineering tool developed by AR that predicts your hull's inherent susceptibility to instabilities leading to porpoising.
*** Sponson Type - now BOTH Asymmetrical and Symmetrical sponson designs available (Ver 7.10.20)
* Centerpod Wangle input - now you have the ability to represent a special angle of attack (trim angle) of the hull CenterPod that is different than the angle of the Sponsons.
* Free Expert Analysis Reports (4) included shows how you can apply expertise to your design/setup. 
* New help screens to steer you through the key features and newest TBDP features.
* Cuddy Cabin Cockpit option added to design considerations.
* Vee Hull and Vee-Pad Hull simulation sample design file - just pick from the list in the Wizard and test!
* Minimum Wetted Sponsons Surface Length - Valuable tool that helps identify critical performance envelope limitations
* Maximum Wetted Sponsons Surface Length - allows specification of maximum wetted sponson length for even more realistic performance results.  Also configures for non-standard hull configurations.
* Static CG on-screen Calculation - when modifying MISC Weights input values the overall boat STATIC CG is calculated every time you make a change, and shown on input sub-screen.
* TBDP now calculates hydrodynamic drag of ANY lower unit design; includes standard design specs for 19 OEM drives.
* NEW enhanced HELP Manual with over 50 pages, over 17,000 words of tutorials, over 70 pictures & HELP illustrations.
* Vee Hull & vee-pad hullQuick Lift simulation
* 3-point Hydro simulation
 

SEE some of the other great Features in TBDP software!

Order Upgrade (only) HERE.
 

 ORDER Upgrade (only) HERE

Version 7.6 - Design-versus-Design Compare Graphic; AutoBlowOver Check

Motor Wizard database updated  - Now over 260 engines listed!